发布时间：2022-08-09 文章分类：编程知识投稿人：赵颖字号：默认 | 大 | 超大打印

Getting Started on Unix Variants

Index

1Get Boost
2The Boost Distribution
3Header-Only Libraries
4Build a Simple Program Using Boost
- 4.1Errors and Warnings
5Prepare to Use a Boost Library Binary
- 5.1Easy Build and Install
- 5.2Or, Build Custom Binaries
  - 5.2.1Install Boost.Build
  - 5.2.2Identify Your Toolset
  - 5.2.3Select a Build Directory
  - 5.2.4Invoke b2
- 5.3Expected Build Output
- 5.4In Case of Build Errors
6Link Your Program to a Boost Library
- 6.1Library Naming
- 6.2Test Your Program
7Conclusion and Further Resources

1Get Boost

The most reliable way to get a copy of Boost is to download a
distribution from SourceForge:

Download boost_1_50_0.tar.bz2.
In the directory where you want to put the Boost installation,
execute
```
tar --bzip2 -xf /path/to/boost_1_50_0.tar.bz2
```

Other Packages

RedHat, Debian, and other distribution packagers supply Boost
library packages, however you may need to adapt these
instructions if you use third-party packages, because their
creators usually choose to break Boost up into several packages,
reorganize the directory structure of the Boost distribution,
and/or rename the library binaries.¹ If you have
any trouble, we suggest using an official Boost distribution
from SourceForge.

2The Boost Distribution

This is a sketch of the resulting directory structure:

boost_1_50_0/ .................The “boost root directory”
index.htm .........A copy of www.boost.org starts here
boost/ .........................All Boost Header files

libs/ ............Tests, .cpps, docs, etc., by library
index.html ........Library documentation starts here
algorithm/
any/
array/
…more libraries…
status/ .........................Boost-wide test suite
tools/ ...........Utilities, e.g. Boost.Build, quickbook, bcp
more/ ..........................Policy documents, etc.
doc/ ...............A subset of all Boost library docs

The organization of Boost library headers isn't entirely uniform,
but most libraries follow a few patterns:

Some older libraries and most very small libraries place all
public headers directly into boost/.
Most libraries' public headers live in a subdirectory of
boost/, named after the library. For example, you'll find
the Python library's def.hpp header in
```
boost/python/def.hpp.
```
Some libraries have an “aggregate header” in boost/ that
#includes all of the library's other headers. For
example, Boost.Python's aggregate header is
```
boost/python.hpp.
```
Most libraries place private headers in a subdirectory called
detail/, or aux_/. Don't expect to find
anything you can use in these directories.

It's important to note the following:

The path to the boost root directory (often /usr/local/boost_1_50_0) is
sometimes referred to as $BOOST_ROOT in documentation and
mailing lists .
To compile anything in Boost, you need a directory containing
the boost/ subdirectory in your #include path.
Since all of Boost's header files have the .hpp extension,
and live in the boost/ subdirectory of the boost root, your
Boost #include directives will look like:
```
#include <boost/whatever.hpp>
```
or
```
#include "boost/whatever.hpp"
```
depending on your preference regarding the use of angle bracket
includes.
Don't be distracted by the doc/ subdirectory; it only
contains a subset of the Boost documentation. Start with
libs/index.html if you're looking for the whole enchilada.

3Header-Only Libraries

The first thing many people want to know is, “how do I build
Boost?” The good news is that often, there's nothing to build.

Nothing to Build?

Most Boost libraries are header-only: they consist entirely
of header files containing templates and inline functions, and
require no separately-compiled library binaries or special
treatment when linking.

The only Boost libraries that must be built separately are:

Boost.Filesystem
Boost.GraphParallel
Boost.IOStreams
Boost.MPI
Boost.ProgramOptions
Boost.Python (see the Boost.Python build documentation
before building and installing it)
Boost.Regex
Boost.Serialization
Boost.Signals
Boost.System
Boost.Thread
Boost.Wave

A few libraries have optional separately-compiled binaries:

Boost.DateTime has a binary component that is only needed if
you're using its to_string/from_string or serialization
features, or if you're targeting Visual C++ 6.x or Borland.
Boost.Graph also has a binary component that is only needed if
you intend to parse GraphViz files.
Boost.Math has binary components for the TR1 and C99
cmath functions.
Boost.Random has a binary component which is only needed if
you're using random_device.
Boost.Test can be used in “header-only” or “separately compiled”
mode, although separate compilation is recommended for serious
use.

4Build a Simple Program Using Boost

To keep things simple, let's start by using a header-only library.
The following program reads a sequence of integers from standard
input, uses Boost.Lambda to multiply each number by three, and
writes them to standard output:

#include <boost/lambda/lambda.hpp>
#include <iostream>
#include <iterator>
#include <algorithm>
int main()
{
using namespace boost::lambda;
typedef std::istream_iterator<int> in;
std::for_each(
in(std::cin), in(), std::cout << (_1 * 3) << " " );
}

Copy the text of this program into a file called example.cpp.

Now, in the directory where you saved example.cpp, issue the
following command:

c++ -I path/to/boost_1_50_0 example.cpp -o example

To test the result, type:

echo 1 2 3 | ./example

4.1Errors and Warnings

Don't be alarmed if you see compiler warnings originating in Boost
headers. We try to eliminate them, but doing so isn't always
practical.³ Errors are another matter. If you're
seeing compilation errors at this point in the tutorial, check to
be sure you've copied the example program correctly and that you've
correctly identified the Boost root directory.

5Prepare to Use a Boost Library Binary

If you want to use any of the separately-compiled Boost libraries,
you'll need to acquire library binaries.

5.1Easy Build and Install

Issue the following commands in the shell (don't type $; that
represents the shell's prompt):

$ cd path/to/boost_1_50_0
$ ./bootstrap.sh --help

Select your configuration options and invoke ./bootstrap.sh again
without the --help option. Unless you have write permission in
your system's /usr/local/ directory, you'll probably want to at
least use

$ ./bootstrap.sh --prefix=path/to/installation/prefix

to install somewhere else. Also, consider using the
--show-libraries and --with-libraries=library-name-list options to limit the
long wait you'll experience if you build everything. Finally,

$ ./b2 install

will leave Boost binaries in the lib/ subdirectory of your
installation prefix. You will also find a copy of the Boost
headers in the include/ subdirectory of the installation
prefix, so you can henceforth use that directory as an #include
path in place of the Boost root directory.

skip to the next step

5.2Or, Build Custom Binaries

If you're using a compiler other than your system's default, you'll
need to use Boost.Build to create binaries.

You'll also
use this method if you need a nonstandard build variant (see the
Boost.Build documentation for more details).

Boost.CMake

There is also an experimental CMake build for boost, supported and distributed
separately. See the Boost.CMake wiki page for more information.

5.2.1Install Boost.Build

Boost.Build is a text-based system for developing, testing, and
installing software. First, you'll need to build and
install it. To do this:

Go to the directory tools/build/v2/.
Run bootstrap.sh
Run b2 install --prefix=PREFIX where PREFIX is
the directory where you want Boost.Build to be installed
Add PREFIX/bin to your PATH environment variable.

5.2.2Identify Your Toolset

First, find the toolset corresponding to your compiler in the
following table (an up-to-date list is always available in the
Boost.Build documentation).

Note

If you previously chose a toolset for the purposes of
building b2, you should assume it won't work and instead
choose newly from the table below.

Toolset Name	Vendor	Notes
`acc`	Hewlett Packard	Only very recent versions are known to work well with Boost
`borland`	Borland
`como`	Comeau Computing	Using this toolset may require configuring another toolset to act as its backend
`darwin`	Apple Computer	Apple's version of the GCC toolchain with support for Darwin and MacOS X features such as frameworks.
`gcc`	The Gnu Project	Includes support for Cygwin and MinGW compilers.
`hp_cxx`	Hewlett Packard	Targeted at the Tru64 operating system.
`intel`	Intel
`msvc`	Microsoft
`sun`	Sun	Only very recent versions are known to work well with Boost.
`vacpp`	IBM	The VisualAge C++ compiler.

If you have multiple versions of a particular compiler installed,
you can append the version number to the toolset name, preceded by
a hyphen, e.g. intel-9.0 or
borland-5.4.3.

5.2.3Select a Build Directory

Boost.Build will place all intermediate files it generates while
building into the build directory. If your Boost root
directory is writable, this step isn't strictly necessary: by
default Boost.Build will create a bin.v2/ subdirectory for that
purpose in your current working directory.

5.2.4Invoke `b2`

Change your current directory to the Boost root directory and
invoke b2 as follows:

b2 --build-dir=build-directory toolset=toolset-name  stage

For a complete description of these and other invocation options,
please see the Boost.Build documentation.

For example, your session might look like this:

$ cd ~/boost_1_50_0
$ b2 --build-dir=/tmp/build-boost toolset=gcc stage

That will build static and shared non-debug multi-threaded variants of the libraries. To build all variants, pass the additional option, “--build-type=complete”.

Building the special stage target places Boost
library binaries in the stage/lib/ subdirectory of
the Boost tree. To use a different directory pass the
--stagedir=directory option to b2.

Note

b2 is case-sensitive; it is important that all the
parts shown in bold type above be entirely lower-case.

For a description of other options you can pass when invoking
b2, type:

b2 --help

In particular, to limit the amount of time spent building, you may
be interested in:

reviewing the list of library names with --show-libraries
limiting which libraries get built with the --with-library-name or --without-library-name options
choosing a specific build variant by adding release or
debug to the command line.

Note

Boost.Build can produce a great deal of output, which can
make it easy to miss problems. If you want to make sure
everything is went well, you might redirect the output into a
file by appending “>build.log 2>&1” to your command line.

5.3Expected Build Output

During the process of building Boost libraries, you can expect to
see some messages printed on the console. These may include

Notices about Boost library configuration—for example, the Regex
library outputs a message about ICU when built without Unicode
support, and the Python library may be skipped without error (but
with a notice) if you don't have Python installed.
Messages from the build tool that report the number of targets
that were built or skipped. Don't be surprised if those numbers
don't make any sense to you; there are many targets per library.
Build action messages describing what the tool is doing, which
look something like:
```
toolset-name.c++ long/path/to/file/being/built
```
Compiler warnings.

5.4In Case of Build Errors

The only error messages you see when building Boost—if any—should
be related to the IOStreams library's support of zip and bzip2
formats as described here. Install the relevant development
packages for libz and libbz2 if you need those features. Other
errors when building Boost libraries are cause for concern.

If it seems like the build system can't find your compiler and/or
linker, consider setting up a user-config.jam file as described
here. If that isn't your problem or the user-config.jam file
doesn't work for you, please address questions about configuring Boost
for your compiler to the Boost.Build mailing list.

6Link Your Program to a Boost Library

To demonstrate linking with a Boost binary library, we'll use the
following simple program that extracts the subject lines from
emails. It uses the Boost.Regex library, which has a
separately-compiled binary component.

#include <boost/regex.hpp>
#include <iostream>
#include <string>
int main()
{
std::string line;
boost::regex pat( "^Subject: (Re: |Aw: )*(.*)" );
while (std::cin)
{
std::getline(std::cin, line);
boost::smatch matches;
if (boost::regex_match(line, matches, pat))
std::cout << matches[2] << std::endl;
}
}

There are two main challenges associated with linking:

Tool configuration, e.g. choosing command-line options or IDE
build settings.
Identifying the library binary, among all the build variants,
whose compile configuration is compatible with the rest of your
project.

There are two main ways to link to libraries:

You can specify the full path to each library:

$ c++ -I path/to/boost_1_50_0 example.cpp -o example \
~/boost/stage/lib/libboost_regex-gcc34-mt-d-1_36.a

You can separately specify a directory to search (with -Ldirectory) and a library name to search for (with -llibrary,² dropping the filename's leading lib and trailing
suffix (.a in this case):
```
$ c++ -I path/to/boost_1_50_0 example.cpp -o example \
-L~/boost/stage/lib/ -lboost_regex-gcc34-mt-d-1_36
```
As you can see, this method is just as terse as method A for one
library; it really pays off when you're using multiple
libraries from the same directory. Note, however, that if you
use this method with a library that has both static (.a) and
dynamic (.so) builds, the system may choose one
automatically for you unless you pass a special option such as
-static on the command line.

In both cases above, the bold text is what you'd add to the
command lines we explored earlier.

6.1Library Naming

In order to choose the right binary for your build configuration
you need to know how Boost binaries are named. Each library
filename is composed of a common sequence of elements that describe
how it was built. For example,
libboost_regex-vc71-mt-d-1_34.lib can be broken down into the
following elements:

lib

Prefix: except on Microsoft Windows, every Boost library
name begins with this string. On Windows, only ordinary static
libraries use the lib prefix; import libraries and DLLs do
not.⁴

boost_regex

Library name: all boost library filenames begin with boost_.

-vc71

Toolset tag: identifies the toolset and version used to build
the binary.

-mt

Threading tag: indicates that the library was
built with multithreading support enabled. Libraries built
without multithreading support can be identified by the absence
of -mt.

-d

ABI tag: encodes details that affect the library's
interoperability with other compiled code. For each such
feature, a single letter is added to the tag:

Key Use this library when: Boost.Build option

s linking statically to the C++ standard library and compiler runtime support
libraries. runtime-link=static

g using debug versions of the standard and runtime support libraries. runtime-debugging=on

y using a special debug build of Python. python-debugging=on

d building a debug version of your code.⁵ variant=debug

p using the STLPort standard library rather than the default one supplied with
your compiler. stdlib=stlport

For example, if you build a debug version of your code for use
with debug versions of the static runtime library and the
STLPort standard library in “native iostreams” mode,
the tag would be: -sgdpn. If none of the above apply, the
ABI tag is ommitted.

-1_34

Version tag: the full Boost release number, with periods
replaced by underscores. For example, version 1.31.1 would be
tagged as "-1_31_1".

.lib

Extension: determined according to the operating system's usual
convention. On most unix-style platforms the extensions are
.a and .so for static libraries (archives) and shared
libraries, respectively. On Windows, .dll indicates a shared
library and .lib indicates a
static or import library. Where supported by toolsets on unix
variants, a full version extension is added (e.g. ".so.1.34") and
a symbolic link to the library file, named without the trailing
version number, will also be created.

6.2Test Your Program

To test our subject extraction, we'll filter the following text
file. Copy it out of your browser and save it as jayne.txt:

To: George Shmidlap
From: Rita Marlowe
Subject: Will Success Spoil Rock Hunter?
---
See subject.

If you linked to a shared library, you may need to prepare some
platform-specific settings so that the system will be able to find
and load it when your program is run. Most platforms have an
environment variable to which you can add the directory containing
the library. On many platforms (Linux, FreeBSD) that variable is
LD_LIBRARY_PATH, but on MacOS it's DYLD_LIBRARY_PATH, and
on Cygwin it's simply PATH. In most shells other than csh
and tcsh, you can adjust the variable as follows (again, don't
type the $—that represents the shell prompt):

$ VARIABLE_NAME=path/to/lib/directory:${VARIABLE_NAME}
$ export VARIABLE_NAME

On csh and tcsh, it's

$ setenv VARIABLE_NAME path/to/lib/directory:${VARIABLE_NAME}

Once the necessary variable (if any) is set, you can run your
program as follows:

$ path/to/compiled/example < path/to/jayne.txt

The program should respond with the email subject, “Will Success
Spoil Rock Hunter?”

7Conclusion and Further Resources

This concludes your introduction to Boost and to integrating it
with your programs. As you start using Boost in earnest, there are
surely a few additional points you'll wish we had covered. One day
we may have a “Book 2 in the Getting Started series” that addresses
them. Until then, we suggest you pursue the following resources.
If you can't find what you need, or there's anything we can do to
make this document clearer, please post it to the Boost Users'
mailing list.

Boost.Build reference manual
Boost Users' mailing list
Boost.Build mailing list
Index of all Boost library documentation

Onward

Good luck, and have fun!

—the Boost Developers

[1]	If developers of Boost packages would like to work with us to make sure these instructions can be used with their packages, we'd be glad to help. Please make your interest known to the Boost developers' list.

[2]	That option is a dash followed by a lowercase “L” character, which looks very much like a numeral 1 in some fonts.

[3]

Remember that warnings are specific to each compiler
implementation. The developer of a given Boost library might
not have access to your compiler. Also, some warnings are
extremely difficult to eliminate in generic code, to the point
where it's not worth the trouble. Finally, some compilers don't
have any source code mechanism for suppressing warnings.

[4]	This convention distinguishes the static version of a Boost library from the import library for an identically-configured Boost DLL, which would otherwise have the same name.

[5]	These libraries were compiled without optimization or inlining, with full debug symbols enabled, and without `NDEBUG` `#define`d. Although it's true that sometimes these choices don't affect binary compatibility with other compiled code, you can't count on that with Boost libraries.

[6]	This feature of STLPort is deprecated because it's impossible to make it work transparently to the user; we don't recommend it.

Key	Use this library when:	Boost.Build option
`s`	linking statically to the C++ standard library and compiler runtime support libraries.	runtime-link=static
`g`	using debug versions of the standard and runtime support libraries.	runtime-debugging=on
`y`	using a special debug build of Python.	python-debugging=on
`d`	building a debug version of your code.⁵	variant=debug
`p`	using the STLPort standard library rather than the default one supplied with your compiler.	stdlib=stlport

Good luck, and have fun!

—the Boost Developers

标签 ED, OS, tar

Boost Getting Started on Unix Variants

Getting Started on Unix Variants

1Get Boost

2The Boost Distribution

3Header-Only Libraries

4Build a Simple Program Using Boost

4.1Errors and Warnings

5Prepare to Use a Boost Library Binary

5.1Easy Build and Install

5.2Or, Build Custom Binaries

5.2.1Install Boost.Build

5.2.2Identify Your Toolset

5.2.3Select a Build Directory

5.2.4Invoke b2

5.3Expected Build Output

5.4In Case of Build Errors

6Link Your Program to a Boost Library

6.1Library Naming

6.2Test Your Program

7Conclusion and Further Resources

5.2.4Invoke `b2`